News

Carbon Fiber Console Decals for the 2013-2017 Mazda CX-5

The Interior Center Console Carbon Fiber Molding Sticker Decals are precision-cut vinyl overlays made for the 2013-2017 Mazda CX-5. They wrap the center console in premium 3D carbon fiber vinyl, so your cabin picks up the woven, high-performance look without the price tag of real carbon fiber parts.

Each piece is cut to match the exact contours of the CX-5 console, including the trim around the gear shift. Installation takes 30-60 minutes with basic household tools, and when you want a change, the decals peel off without damaging the original surfaces.

Why Pick Decals Over Replacement Trim?

Genuine carbon fiber console parts look great, but they hit the wallet hard: expect $200-500+ for the parts plus 2-4 hours of work that usually needs professional tools. The decal route costs $30-60, takes under an hour, and uses tools you already have at home. If you lease your CX-5 or simply like changing things up, the reversibility alone settles the argument.

• Cost — $30-60 versus $200-500+ for replacement parts
• Speed — 30-60 minutes of work, not a 2-4 hour shop visit
• Tools — basic household tools, no professional installation required
• Protection — a layer that helps prevent scratches and wear on the original console
• Reversible — removes without damaging original surfaces
• Custom fit — designed for 2013-2017 CX-5 console contours

Side-by-Side Comparison

Why Carbon Fiber Styling Works in a Cabin

Carbon fiber has become one of the most popular interior finishes in cars because the woven texture reads as modern and high-performance — even in a family crossover like the CX-5. Real carbon panels are expensive, which is exactly why vinyl decals have taken off: same look, small budget. The 3D vinyl in this set carries a realistic texture rather than a flat print, so it catches light the way true weave does.

Specifications at a Glance

Here is the full spec sheet for the decal set:

Exact coverage depends on the package, so check the product page for the Interior Center Console Carbon Fiber Molding Sticker Decals before ordering to see exactly which pieces come in the set.

How to Install the Decals

Set aside about an hour and work slowly around the curves — the result looks factory-fitted when you do.

1. Clean the surface. Wipe the whole console area with isopropyl alcohol and let it dry. Dust or grease left behind will show up as bubbles later.
2. Test fit first. Hold each decal in position without removing the backing to confirm the alignment before you commit.
3. Peel and apply. Pull the backing away slowly and lay the decal down from one edge, working across the panel.
4. Push the air out. Run a squeegee or a credit card over the surface. The air-release channels in the adhesive let trapped air escape for a bubble-free finish.
5. Inspect the edges. Press down every edge and corner to confirm the decal is fully bonded.

Cleaning and Long-Term Care

The decals are UV resistant, but a little routine care stretches that 3-5 year service life:

• Wipe the surface regularly with a soft, damp cloth
• Keep sharp objects — keys, tools, scrapers — away from the vinyl
• Apply a UV protectant spray if the car sits in strong sun for long stretches
• Press any lifting edge back down promptly, using gentle heat to reactivate the adhesive

For cleaning products, stick to mild soap and water or dedicated automotive interior cleaners. Skip abrasive cleaners and solvents — both can damage the finish.

What Sets This Kit Apart

• OEM-level precision — exact fit for your Mazda CX-5
• Premium materials — high-quality 3D carbon fiber vinyl
• Complete coverage — a full set for a comprehensive interior upgrade
• Customer support — expert guidance for installation and maintenance
• Value for money — a premium look at an affordable price

Behind the product, Koeep points to thousands of satisfied customers worldwide, automotive-grade materials and full product support on every order.

Need Help Before You Order?

Not sure the decals match your trim, or shopping for a different part entirely? Three ways to reach the team:

• Request for Quote page — send your vehicle details and the parts you need, and you get pricing back.
• support@koeep.com — email for fitment questions about the CX-5 decals.
• WhatsApp chat — message the support team directly.

Other Mazda Parts in the Koeep Catalog

If you maintain more than one Mazda, the store also stocks hard parts alongside interior dress-up pieces. Two listings that come up often:

• Camshaft Position Sensor for Mercury Mariner, Milan, Lincoln Mark LT and Mazda CX-9 — a direct replacement sensor covering those models, useful when a CX-9 job lands on your bench.
• 4 X Fuel Injectors for Mazda Speed 3 2007-2013, Speed 6 2006-2007 and CX-7 2007-2012 — a full four-injector set for those engines.

Browsing for more cabin upgrades? The Interior Auto Parts collection pulls the full range of interior trim, covers and accessories into one place — handy when one console decal turns into a bigger refresh. The long version of this guide also lives on the Koeep blog if you want to share the install steps with a friend.

If Something Is Not Right

Koeep stands behind the quality of its products. If you are not completely satisfied with your Interior Center Console Carbon Fiber Molding Sticker Decals, contact the customer service team for assistance.

Frequently Asked Questions