News

Ford Fusion Center Console: a 5D Carbon Fiber Upgrade You Fit Yourself

Your center console takes more abuse than any other surface inside the car. Keys, rings, belt buckles, coffee cups — it all lands there first. If the plastic on your Fusion's console is already scuffed and dull, the Interior Center Console 5D Carbon Fiber Molding Sticker covers the wear, adds a carbon fiber look, and shields the surface underneath.

This sticker is cut for Ford Fusion models from 2017 onwards. It follows the console's contours and leaves openings for every button, switch, and storage compartment, so nothing on the car stops working after installation.

You fit it yourself in 30 to 60 minutes with no special tools. Here is what it does, how it fits, and how to install it.

What the 5D Sticker Actually Does

The sticker uses 5D printing technology to reproduce a carbon fiber weave with real depth, so it reads as texture instead of a flat print. The look is only half the story, though. Underneath it you get three practical benefits:

• Scratch protection. The film sits over the console and takes the daily wear instead of the factory plastic.
• UV resistance. High-quality PVC with a UV-resistant coating holds its color instead of fading out.
• Reversible upgrade. The adhesive releases cleanly, so the sticker removes without residue and the original console stays intact.

That last point matters if you lease your Fusion or plan to sell it. Traditional console customization is permanent. This is not.

Fitment: Built for Fusion 2017 and Newer

Precision cutting does the heavy lifting here. The sticker is contour-matched to the center console and designed to integrate with the existing interior design, so the result looks deliberate rather than stuck on. It covers all 2017+ Fusion trims.

• Contour matching for the center console curves
• Accurate cutouts for all buttons, switches, and storage compartments
• No interference with vehicle functionality
• Fits SE, SEL, Titanium, and Sport trims with standard center console configurations

Product at a Glance

How to Install It

Set aside 30 to 60 minutes, plus a 24-hour curing window before you put the console back to work. The steps:

1. Clean the surface. Wipe the center console thoroughly with isopropyl alcohol so the adhesive bonds properly.
2. Position the sticker. Align it with the console's contours before peeling any backing.
3. Apply it slowly. Peel a little at a time and smooth the film down with the squeegee tool included in the box.
4. Work the curves. A heat gun (optional) helps the film adhere perfectly on curved surfaces.
5. Let it cure. Give it 24 hours of full adhesion before heavy use.

No trimming, no drilling, no shop visit. The car stays usable the entire time.

Sticker vs. Professional Console Work

A shop-built console upgrade costs real money and keeps your car off the road for days. The sticker takes a different route. Here is the comparison:

Keeping It Clean

Maintenance takes seconds. Wipe the surface with a damp microfiber cloth when it needs it. Skip harsh chemicals and abrasive cleaners — in normal use the finish resists fingerprints and smudges, so you should not need anything stronger.

Other Ways to Style the Same Console

If you want a different layout for the same spot, koeep carries two decal versions of this part: the Interior Center Console Carbon Fiber Molding Sticker Decals for Ford Fusion 2017 and the Interior Center Console Carbon Fiber Molding Sticker Decals for Ford Fusion 17+. Same fitment idea, different decal design — worth a quick comparison before you order.

Planning a bigger interior refresh? The Interior Auto Parts collection holds the full catalog of car and motorcycle accessories.

Drive something else? The same sticker concept covers other models — see it applied to a Hyundai Sonata 9th Generation center console.

Why Order From koeep

The sticker is laser-cut for perfect alignment, and the order terms back that up:

• Precision fit. Laser-cut for perfect alignment.
• Easy returns. 30-day satisfaction guarantee.
• Fast shipping. Free shipping on qualified orders.
• Proven product. Thousands of satisfied customers.

Check Fitment and Order the 5D Sticker

What Owners Say

"I was skeptical about installing the carbon fiber sticker myself, but the instructions were perfect. The result looks like factory installation! My Fusion interior now has that premium sports car feel." — Michael R., Ford Fusion owner

Frequently Asked Questions

Questions About Fitment? Ask Before You Order

Not sure the cutouts match your console layout? Ask first. Send your console details through the request-for-quote page and the team will check your case. For a direct answer, email support@koeep.com or message WhatsApp — whichever is faster for you.