Transform Your Hyundai Elantra Interior with Red Center Console Molding Sticker
Give Your Hyundai Elantra a Red Center Console in About Ten Minutes
The center console is the busiest panel in your Elantra's cabin. Keys, phones, and everyday use all leave marks on it, and the factory black finish does little for the look of the interior. The Interior Center Console Red Color Molding Sticker for Hyundai Elantra 2016-2020 fixes both problems with a single peel-and-stick vinyl panel: a red accent on the surface, a protective layer underneath.
No tools, no drilling, no paint. And because the sticker is removable, the modification stays reversible — lift it off and the original console underneath is exactly as it was.
There is no wiring, no clip work, and no trim removal involved either. The entire job is done with your fingertips, which is why this is one of the few cabin upgrades you can finish the same day the part arrives.
Why Start With the Center Console?
Most interior upgrades either cost a lot or can't be undone. This one is deliberately the opposite: it's a cost-effective way to change the feel of the cabin, and it makes no permanent changes to the vehicle. You get a visible result right away, and you keep the option of returning to stock whenever you want.
One panel, two jobs: a red accent where you look every day, and a scratch shield over the original plastic. Five to ten minutes of work, fully reversible.
Key Features at a Glance
- Vibrant red finish — high-quality vinyl that maintains its color and shine.
- Easy installation — no tools required; it's a simple peel-and-stick application.
- Protective layer — shields the original console from scratches and wear.
- Removable design — comes off without damaging the original surfaces.
- Weather resistant — durable material that withstands temperature variations.
Built for the 2016-2020 Console
The panel is specifically engineered to match the exact contours of the Elantra center console for 2016 through 2020. That matters more than it sounds: a generic sticker leaves overhang and lifted edges, while a contour-matched one sits flush and reads as a factory piece rather than an add-on.
Full Spec Sheet
| Spec | Detail |
|---|---|
| Vehicle fitment | Hyundai Elantra, 2016-2020 model years |
| Placement | Interior, center console |
| Material | High-quality vinyl, fade-resistant |
| Finish | Vibrant red |
| UV resistance | UV-resistant vinyl, holds color in sunlight |
| Water resistance | Withstands normal car cleaning |
| Installation | Peel and stick, no tools |
| Typical install time | 5-10 minutes |
| Removal | Lifts off without damaging original surfaces |
| Guarantee | 30-day satisfaction guarantee |
Installation: Five Steps, No Tools
You don't need a workshop or prior experience with trim work. The whole process looks like this:
- Clean the center console surface thoroughly.
- Peel the backing from the sticker.
- Align it carefully with the console edges.
- Press firmly, working from the center outward.
- Smooth out any air bubbles.
Where People Rush
The alignment step decides how clean the final result looks, so take your time there. Set one edge first, check it against the console outline, then lay the rest down as you press from the middle outward. From cleaning to the last smoothed bubble, plan on 5-10 minutes.
No professional installation is required — the peel-and-stick design is meant to be done by the owner, first try.
Stock Console vs. Protected Console
Here is what actually changes once the panel is on:
| Feature | Standard console | With red molding sticker |
|---|---|---|
| Appearance | Factory black/gray | Vibrant red accent |
| Protection | Direct wear on the console | Extra protective layer |
| Customization | Limited options | Personalized look |
| Resale value | Standard interior | Enhanced appeal |
| Installation time | N/A | 5-10 minutes |
The protection and resale rows are the ones worth thinking about long term. The layer takes the scratches instead of the console, and a clean, cared-for interior is easier to present when it's time to sell the car.
Red, or Carbon Fiber?
Red isn't the only finish available for this exact console. If your cabin already leans dark, the Interior Center Console Carbon Fiber Molding Sticker for Hyundai Elantra 2016-20 covers the same panel with a carbon fiber print, using the same peel-and-stick method and the same clean removal. Pick it for texture; pick the red for a visible pop of color.
Do you drive a ninth-generation Sonata instead of an Elantra? The same upgrade exists for that car too, and we cover it in a separate guide: Interior Center Console Carbon Fiber Molding Sticker for Hyundai Sonata 9th Generation.
One More Interior Part Worth Knowing
If your household also includes an older Elantra, keep the clock spring on your radar. The For Hyundai Elantra 2011-2013 Hyundai 09-15 Clock Spring 93490-3Q120 maintains the electrical connection through the steering wheel — the connection that keeps the horn and wheel controls working as the wheel turns. If those functions act up on a 2011-2013 car, this is the part to look at.
For everything else in the cabin — covers, trim, and accessories — start from the Interior Auto Parts collection and narrow down from there.
Ordering, Guarantees, and Getting Help
Every order is covered by the store's standard terms:
- 30-day satisfaction guarantee
- Free shipping on orders over $50
- 24/7 customer support
- Easy return policy
Thousands of Hyundai Elantra owners have already transformed their interiors with these red console stickers.
Fitment Check Before You Buy
Not sure the panel matches your console layout? Send your vehicle details and a photo of the console through the request-for-quote page, and the team will check the fitment before you order.
Talk to a Human
Questions at any point? Email support@koeep.com or message the team on WhatsApp — support runs 24/7, and returns are straightforward if something isn't right.
Ready to Transform Your Elantra?
Stop Living With a Plain Black Console
Don't settle for a standard interior. The red molding sticker is made for 2016-2020 Elantra models, installs in minutes, and reverses cleanly if you change your mind later.
Shop Now — Transform Your InteriorFrequently Asked Questions
Will the sticker damage my original console?
No. The high-quality adhesive removes cleanly — no residue, no damage to the original surface underneath.
How durable is the red color?
The premium vinyl is UV-resistant and is designed to keep its vibrant red shade through regular use and exposure to sunlight.
Do I need a professional to install it?
No. The peel-and-stick design makes it easy for anyone to install: clean the surface, align, press from the center outward, then smooth the bubbles.
Will it fit my specific Elantra model year?
Yes — the sticker is designed specifically for Hyundai Elantra models from 2016 to 2020, so the console contours line up across all of those years.
Can I wash my car with the sticker installed?
Yes. The sticker is water-resistant and stands up to normal car cleaning procedures.
How long does the installation take?
Plan on 5-10 minutes total: cleaning, peeling, aligning, pressing from the center outward, and smoothing out the air bubbles.
What if red doesn't match my interior?
The same console panel is available with a carbon fiber print for the 2016-2020 Elantra — same fit, same removal, a darker finish instead of color.
- Interior Center Console Red Color Molding Sticker For Hyundai Elantra 2016-2020
- Interior Center Console Carbon Fiber Molding Sticker For Hyundai Elantra 2016-20
- For Hyundai Elantra 2011-2013 Hyundai 09-15 Clock Spring 93490-3Q120
- Interior Auto Parts | Koeep Quality Car & Motorcycle Accessories
- Interior Center Console Carbon Fiber Molding Sticker for Hyundai Sonata 9th Generation
- Request for Quote — Koeep
![[1]](http://koeep.com/cdn/shop/files/1_44c16fb0-dafe-4c82-a7ae-a1396b0d2c42_165x.webp?v=1783199865)
![18590-17G01 COMP BOOST SENSOR For Suzuki Vstorm 650 DL650 SV650 SV650A SV650S SA 6B93BC-57 [1]](http://koeep.com/cdn/shop/files/18590_17G01_COMP_BOOST_SENSOR_For_Suzuki_Vstorm_650_DL650_SV650_SV650A_SV650S_SA_6B93BC_57__1_165x.webp?v=1783199418)