Complete Guide to Black Golf Cart Rear Seat Cushion Set for EZGO TxT, ST, ST Sport, Valor Models
The Short Version
The Black Golf Cart Rear Seat Cushion Set is a two-piece replacement for the rear seat of EZGO TxT, ST, ST Sport, and Valor golf carts. You get a back rest cushion and a seat bottom cushion, both wrapped in classic black vinyl over high-density foam.
It is a direct replacement. The cushions line up with the existing mounting hardware, so there is nothing to drill, cut, or fabricate. Total install time runs about 30–45 minutes with basic tools.
If the foam in your rear seat has packed down or the vinyl has torn, this set restores the seat without touching the frame. Below you get the full specs, the install steps, the maintenance routine, and straight answers to the questions buyers actually ask.
What Comes in the Set
- Back rest cushion — the upper section of the rear seat.
- Seat bottom cushion — the pad your passengers sit on.
- Premium vinyl covering in classic black — UV-resistant and water-resistant.
- High-density foam core — thicker and more supportive than standard factory foam.
- Premium quality guarantee — the warranty coverage behind the set.
Fitment: Check Your Model First
The set is engineered for four EZGO lines — TxT, ST, ST Sport, and Valor. The specifications also cover MPT and RXV models, so most EZGO rear seats in service today fall inside the fitment range.
- EZGO TxT
- EZGO ST
- EZGO ST Sport
- EZGO Valor
- EZGO MPT
- EZGO RXV
Because it is a direct replacement, the cushions attach to the factory mounting points and you reuse the original hardware. No adapter plates, no brackets, no cutting.
That matters most when the current cushions are cracked, flattened, or torn. You swap the pads, keep the frame, and the rear seat looks and feels refreshed without the cost of a full seat assembly.
Technical Specifications
Everything the set claims, in one table:
| Specification | Details |
|---|---|
| Compatible models | EZGO TxT, MPT, RXV, ST, ST Sport, Valor |
| Set components | 2-piece set — back rest + seat bottom |
| Color | Classic Black |
| Material construction | High-density foam with premium vinyl covering |
| Weather resistance | UV-resistant, water-resistant vinyl |
| Installation type | Direct replacement — no modification required |
| Warranty | Premium quality guarantee |
Two rows carry the most weight for daily users: the material construction row and the weather resistance row. The next section explains why.
Materials: Foam and Vinyl
Two materials decide how long a seat cushion survives: the foam underneath and the cover on top. This set pairs high-density foam with a premium vinyl skin. Dense foam resists packing down under passenger weight — which is exactly what flattens cheap cushions.
The vinyl layer handles the outdoors. It is UV-resistant, so it holds its color through long sun exposure instead of bleaching out. It is water-resistant too, so dew and rain sit on the surface instead of soaking into the foam. That combination is why the set is rated for outdoor use in all weather conditions.
Why Black Works
Black was the right call for a replacement cover. It hides road dust, matches nearly every body color EZGO shipped, and looks factory rather than bolted-on.
OEM Cushions vs. This Set
The table below sets this cushion set against standard factory cushions, row by row:
| Feature | OEM Factory Cushions | This Cushion Set |
|---|---|---|
| Foam density | Standard density | High-density premium foam |
| Comfort level | Basic comfort | Enhanced passenger comfort |
| Durability | Average 2–3 years | Extended 5+ year lifespan |
| Weather resistance | Basic protection | Advanced UV and water resistance |
| Installation | Factory installed | Easy direct replacement |
| Value | Standard quality | Premium quality at competitive price |
Read the durability row twice, because it carries the money argument. Factory cushions average 2–3 years before they need replacing. This set is built for a 5+ year lifespan. Over six years of ownership, that is the difference between buying rear cushions twice or buying them once.
The weather row matters just as much if the cart lives outside. Factory covers give basic protection; this vinyl treats UV and water resistance as core features, not extras.
Industry experts reach the same conclusion. Research on aftermarket golf cart seat cushions shows that quality pads use thicker, more durable foam than standard factory cushions, which is where both the extra comfort and the longer service life come from.
Installation: About 30–45 Minutes
You do not need a shop for this job. The cushions are direct replacements, and the whole swap runs roughly 30–45 minutes with basic tools. Work through the steps in order.
The Five Steps
- Remove the old cushions. Carefully detach the worn cushions from the mounting hardware without bending the brackets.
- Clean the surface. Wipe down the seat frame and the mounting area so the new vinyl does not sit on grit.
- Position the new cushions. Align each cushion with the existing mounting points.
- Secure them in place. Use the original hardware to fasten both cushions down.
- Run a final check. Confirm every connection is tight and both cushions sit square to the frame.
The final check is worth ten extra seconds. A loose cushion works its way out of alignment over time, and a tight, square install is what keeps the new set looking factory.
Maintenance: Four Habits That Stretch the Life
Vinyl is forgiving, but four habits keep it looking new for the full service life:
- Clean regularly. Mild soap and water on the vinyl surfaces is all it takes.
- Feed the vinyl. Apply a vinyl protectant every 3–6 months to guard against UV exposure.
- Store it covered. When the cart sits unused, cover it to protect the seat from the elements.
- Check the hardware. Look over the mounting hardware now and then and re-tighten anything loose.
The protectant step is the one owners skip, and it is the cheapest of the four. A few minutes every 3–6 months keeps the vinyl supple instead of dry and chalky.
Where to Order, and How the Listings Work
The set lives on koeep.com under the main product page. Koeep also stocks the identical cushion set on two alternate listings — the original listing and this alternate listing — so a stock-out on one page does not hold up your order.
Upgrading more than one vehicle? The interior auto parts collection pulls the full range of car and motorcycle cabin components into one catalog, handy when you are matching seat parts across a small fleet.
For wider maintenance reading, the koeep blog ranks 2024's best selling tires by performance and safety — useful if the truck that hauls the cart is due for rubber too.
Frequently Asked Questions
Will this cushion set fit my specific EZGO model?
It is designed for EZGO TxT, ST, ST Sport, and Valor models, and the specifications add MPT and RXV compatibility. It is a direct replacement that works with the existing mounting hardware, so if your cart is one of those models, the answer is yes.
What is included in the set?
Both rear seat pieces: the back rest cushion and the seat bottom cushion. You get everything needed for a complete rear seat upgrade in one purchase.
Is professional installation required?
No. The cushions are direct replacements, and installation takes about 30–45 minutes with basic tools. If you can run a wrench, you can do this job.
Do I need to drill or modify anything?
No. The set requires no modification. The new cushions align with the existing mounting points and fasten down with the original hardware.
Are the cushions weather-resistant?
Yes. The premium vinyl covering is UV-resistant and water-resistant, which makes the set suitable for outdoor use across different weather conditions.
How should I clean and protect the vinyl?
Clean with mild soap and water, and apply a vinyl protectant every 3–6 months. Cover the cart when it is not in use, and keep an eye on the mounting hardware for tightness.
How does this set compare to OEM cushions?
It uses higher density foam, adds UV and water resistance, and is built for a 5+ year lifespan against the 2–3 year average of factory cushions. Comfort and support for passengers are both a step up.
Is there a warranty?
Yes. The set carries a premium quality guarantee. If a question comes up before or after you buy, support is one message away — see the contact options below.
Ordering and Support
Ready to replace those flat rear cushions? Order the Black Golf Cart Rear Seat Cushion Set and block out half an hour.
Buying for a fleet, a rental operation, or a course and need volume pricing? Send the request for quote form and work from a written number.
Have a fitment question before you click buy? Two fast channels:
- Email: support@koeep.com
- WhatsApp: +86 181 3883 8291
Upgrade Your Golf Cart Comfort Today
Two cushions. Direct fit. About 30–45 minutes of work.
Shop the Rear Seat Cushion Set- Black Golf Cart Rear Seat Cushion Set For EZGO TxT, ST, ST Sport, Valor models — main product page: specifications, fitment, and OEM comparison.
- Black Golf Cart Rear Seat Cushion Set For EZGO TxT, ST, ST Sport, Valor models — original listing for the same set.
- Black Golf Cart Rear Seat Cushion Set For EZGO TxT, ST, ST Sport, Valor models — alternate listing for the same set.
- Interior Auto Parts | Koeep Quality Car & Motorcycle Accessories — full interior parts catalog.
- 2024's Best Selling Tires Ranked by Performance and Safety — koeep blog, tire performance and safety rankings.
- Request for Quote — volume, fleet, and course pricing requests.
![[1]](http://koeep.com/cdn/shop/files/1_44c16fb0-dafe-4c82-a7ae-a1396b0d2c42_165x.webp?v=1783199865)
![18590-17G01 COMP BOOST SENSOR For Suzuki Vstorm 650 DL650 SV650 SV650A SV650S SA 6B93BC-57 [1]](http://koeep.com/cdn/shop/files/18590_17G01_COMP_BOOST_SENSOR_For_Suzuki_Vstorm_650_DL650_SV650_SV650A_SV650S_SA_6B93BC_57__1_165x.webp?v=1783199418)