Vapor Canister Purge Valve For 2007-2013 Chevrolet Avalanche Tahoe 5.3L 6.0L

Part Overview

The Vapor Canister Purge Valve is a key EVAP (Evaporative Emission Control System) component for the 2007-2013 Chevrolet Avalanche and 2007-2013 Chevrolet Tahoe powered by the 5.3L or 6.0L V8. The valve opens on a controlled duty cycle from the engine ECM to draw stored fuel vapors from the charcoal canister into the intake manifold for combustion, preventing raw fuel vapor from escaping to atmosphere. KOEEP supplies this part as a brand-new aftermarket replacement that matches the OEM solenoid's electrical terminals, vacuum ports, and mounting footprint.

A failed purge valve commonly triggers a check-engine light (typically P0441, P0443, P0446, or P0496), may cause a slight rough idle, and can fail an OBD-II readiness or state emissions inspection.

Vehicle Compatibility

Compatibility is based on the GMT900 platform with 5.3L and 6.0L V8 engines. Please confirm your existing purge valve's connector (2-pin vs. 3-pin) and vacuum-port orientation before ordering.

Key Specifications

Why Choose This Part?

• Direct Fit for 2007-2013 Chevrolet Avalanche & Tahoe 5.3L / 6.0L: Engineered to match the OEM valve's electrical and vacuum port layout for clean, drop-in replacement.
• Clears EVAP Check-Engine Codes: Resolves P0441 / P0443 / P0446 / P0496 and similar fault codes caused by a stuck-open or stuck-closed purge valve.
• Fuel-Vapor & Emissions Compliant: Restores correct routing of fuel vapors from the charcoal canister to the intake, helping the vehicle pass OBD-II readiness checks.
• Rigorous QC: Each valve is tested for solenoid coil resistance, leak rate, and duty-cycle response before shipment.
• 1-Year Warranty & Free Worldwide Shipping: Full 12-month coverage plus free shipping on every order.

How to Order

Click Add to Quote above, or email us at support@koeep.com with your vehicle's Make / Model / Year / Engine and the OBD-II code (if available). Our parts team will respond within 24 hours with availability, shipping ETA, and pricing.

Reminder: after installation, the ECM will typically clear the EVAP DTC after a few drive cycles. A scan tool can also be used to command the valve and confirm proper operation.