![[1]](http://koeep.com/cdn/shop/files/1_44c16fb0-dafe-4c82-a7ae-a1396b0d2c42_1370x.webp?v=1783199865)
![[2]](http://koeep.com/cdn/shop/files/2_73e19db9-805b-4499-8dad-2c44fb407039_1370x.webp?v=1783199870)
![18590-17G01 COMP BOOST SENSOR For Suzuki Vstorm 650 DL650 SV650 SV650A SV650S SA 6B93BC-57 [1]](http://koeep.com/cdn/shop/files/18590_17G01_COMP_BOOST_SENSOR_For_Suzuki_Vstorm_650_DL650_SV650_SV650A_SV650S_SA_6B93BC_57__1_1570x.webp?v=1783199418)
![18590-17G01 COMP BOOST SENSOR For Suzuki Vstorm 650 DL650 SV650 SV650A SV650S SA 6B93BC-57 [2]](http://koeep.com/cdn/shop/files/18590_17G01_COMP_BOOST_SENSOR_For_Suzuki_Vstorm_650_DL650_SV650_SV650A_SV650S_SA_6B93BC_57__2_1570x.webp?v=1783199423)
Transform Your Mazda CX-5 Interior with Premium Carbon Fiber Center Console Decals
Transform Your Mazda CX-5 Interior with Premium Carbon Fiber Center Console Decals
Your CX-5 center console takes more abuse than any other panel in the cabin. Fingernails, keys, coffee cups, and direct sun all land on the same stretch of plastic. On 2013-2017 models, that surface starts to look scratched and faded long before the rest of the interior does.
The Interior Center Console Carbon Fiber Molding Sticker Decals fix that with adhesive alone. Each piece is 3D carbon fiber vinyl, cut to the shape of this exact console. You press them on, smooth them flat, and the cabin immediately reads like a higher trim level.
Quick take: premium 3D carbon fiber vinyl, custom-cut for the 2013-2017 Mazda CX-5 center console. Installs in 30-45 minutes with no professional help. Rated for 5+ years of service with proper care, and it removes cleanly if you ever want the stock look back. See full details, photos, and pricing on the product page.
What You Get
A fit cut for this exact console
Generic decal sheets leave gaps and overhang. These decals are custom-designed for the center console of the 2013-2017 Mazda CX-5, so the edges follow the factory panel lines instead of fighting them. The precision-cut layout delivers seamless installation without gaps or misalignment.
3D carbon fiber with real depth
The material is high-quality 3D carbon fiber vinyl with a realistic woven texture and visible depth — not a flat printed pattern. It is durable and scratch-resistant, and it holds its appearance through daily use: bags, elbows, zippers, and all.
Protection that pays off at resale
Every decal doubles as a shield. The vinyl blocks scratches, UV damage, and everyday wear before they reach the original surface. Lift the decals off later and the console underneath is untouched — exactly what a future buyer wants to see. One small part, a real effect on resale value.
Coverage: Every Key Zone of the Console
One kit covers all the high-visibility areas of your center console:
- Gear shift panel surround
- Center storage compartment lid
- Cup holder trim
- Climate control panel borders
- Armrest sections
Because each piece is precision-cut to shape, the overlays line up with the factory panel gaps. The finished console looks molded in, not stuck on.
Specs at a Glance
| Spec | Detail |
|---|---|
| Vehicle fitment | 2013-2017 Mazda CX-5 |
| Trim compatibility | All trims — Sport, Touring, and Grand Touring |
| Material | 3D carbon fiber vinyl with realistic texture and depth |
| Installation | DIY, adhesive-backed, repositionable during application |
| Installation time | 30-45 minutes |
| Service life | 5+ years with proper installation and care |
| UV resistance | Excellent — resists fading and UV damage |
| Removal | Clean and residue-free, no damage to the original surface |
| Best install temperature | Above 65°F / 18°C for optimal adhesive performance |
| Guarantee | 30-day satisfaction guarantee, free shipping on all orders |
Carbon Fiber vs. Standard Vinyl vs. Paint
Wondering how decals stack up against the alternatives? Here is the same comparison we use when choosing materials for our own cars:
| Feature | Premium carbon fiber | Standard vinyl decals | Traditional paint |
|---|---|---|---|
| Durability | 5+ years with proper care | 1-2 years | 3-5 years |
| Installation time | 30-45 minutes | 20-30 minutes | 2-3 days |
| Cost | $$ (affordable) | $ (budget) | $$$$ (expensive) |
| Reversibility | Yes — no damage | Yes — some residue | No — permanent |
| UV resistance | Excellent | Good | Varies |
The short version: paint looks good but is permanent, slow, and expensive. Budget vinyl saves a few dollars and lasts a year or two. The premium carbon fiber kit hits the sweet spot — 5+ years of service, full reversibility, and a mid-range price.
How to Install the Decals
Set aside 30-45 minutes and gather three things: isopropyl alcohol, a clean cloth, and a squeegee. Then work through the steps in order:
- Clean the surface. Wipe the console down thoroughly with isopropyl alcohol and let it dry.
- Position every decal. Test-fit all pieces before peeling off any backing paper.
- Apply gradually. Start at one edge and smooth the vinyl outward as you go.
- Push out the air bubbles. Use the squeegee to work trapped air toward the nearest edge.
- Inspect the edges. Check corners and borders to confirm every piece is fully adhered.
Professional tip: install the decals in a warm space — above 65°F / 18°C. Warmth keeps the adhesive at full tack and the vinyl flexible, which is what makes corners and curves lay down cleanly.
Cleaning and Care
Maintenance is close to zero. Wipe the surface with a damp microfiber cloth when it picks up dust or fingerprints. Skip harsh chemicals and abrasive cleaners — the scratch-resistant finish does not need them, and they can dull the texture.
That is the whole routine. The UV-resistant material handles sun exposure on its own, so no extra treatments belong anywhere near the console.
More Mazda Parts While You Are Here
Koeep is not just trim and decals. If the mechanical side of your Mazda — or another vehicle in the driveway — needs work, these are worth a look:
- Camshaft position sensor for Mercury Mariner, Milan, Lincoln Mark LT, and Mazda CX-9 — a direct replacement for the models listed.
- 4 X Fuel Injectors for Mazda Speed 3 2007-2013, Speed 6 2006-2007, and CX-7 2007-2012 — sold as a four-pack.
Refreshing more than the console? Browse the full Interior Auto Parts collection — dash trim, consoles, and accessories organized so you can match fitment fast.
Still weighing the upgrade? Read our companion guide, Enhance Your Mazda CX-5 Interior with Carbon Fiber Center Console Decals, for another angle on the same install.
Questions? Talk to a Human
Not sure your console layout matches the decal set? Send photos through the request-for-quote page and we will check fitment before you order. You can also email support@koeep.com or message us on WhatsApp — trim-level questions and install-order questions are the ones we answer most.
Ready to Transform Your CX-5 Console?
Join thousands of owners who have already swapped plain plastic for a precision carbon fiber look. Free shipping on all orders, backed by a 30-day satisfaction guarantee.
Shop the Mazda CX-5 Carbon Fiber Console DecalsFrequently Asked Questions
Will the decals damage my original console surface?
No. They use high-quality removable adhesive designed to come off clean and residue-free. Removed properly, the original console looks exactly as it did before the decals went on.
How long do the decals last?
With proper installation and care, expect 5+ years of service. The material is UV resistant and holds its color and texture through normal daily use.
Can I install them myself with no experience?
Yes. The decals are designed for DIY installation, and the vinyl is flexible and forgiving — you can lift and reposition pieces during application. For the best results, watch the installation video before you start.
Do they fit every 2013-2017 Mazda CX-5 trim?
Yes. The decals are designed to fit all 2013-2017 Mazda CX-5 models regardless of trim level — Sport, Touring, and Grand Touring included.
What parts of the console does the kit cover?
The gear shift panel surround, center storage compartment lid, cup holder trim, climate control panel borders, and armrest sections — all the areas you see and touch every drive.
How do I clean the carbon fiber surface?
Wipe it with a damp microfiber cloth. Avoid harsh chemicals and abrasive cleaners. The surface is scratch-resistant, so routine wiping is all it needs.
How long does the installation take?
Plan for 30-45 minutes, start to finish. That includes cleaning the console with isopropyl alcohol, test-fitting each piece, applying gradually, and squeegeeing out air bubbles.
Why does install temperature matter?
Adhesive needs warmth to reach full tack, and cold vinyl resists stretching. Install above 65°F / 18°C and the decals flex into corners cleanly and bond the way they were designed to.
- Interior Center Console Carbon Fiber Molding Sticker Decals For Mazda CX-5 13-17 — Koeep product page
- Enhance Your Mazda CX-5 Interior with Carbon Fiber Center Console Decals — Koeep blog
- Interior Auto Parts — Koeep Quality Car & Motorcycle Accessories
- Camshaft Position Sensor for Mercury Mariner, Milan, Lincoln Mark LT, Mazda CX-9 — Koeep product page
- 4 X Fuel Injectors for Mazda Speed 3 2007-2013, Speed 6 2006-2007, CX-7 2007-2012 — Koeep product page
- Request for Quote — Koeep