News

The fog light bezel cover on a Subaru Forester (model years 2009-2013, SH generation) is a molded plastic trim piece that surrounds the fog lamp assembly. Over time, these bezels can crack, fade, or become damaged due to road debris, UV exposure, or minor collisions. Replacement is straightforward and restores the vehicle's appearance and protects the fog light housing.**Identifying the Correct Part**The bezel cover is specific to the front bumper design of the 2009-2013 Forester. Subaru OEM part numbers include 57731SC000 (left) and 57731SC010 (right). Aftermarket options are available but should match OEM specifications for fitment.**Tools and Materials**- Replacement bezel covers (pair)- Trim removal tool or flathead screwdriver (wrapped in tape)- Torx T20 or T25 screwdriver (depending on trim level)- Optional: plastic push pin remover**Step-by-Step Replacement**1. Ensure the vehicle is parked on level ground and the ignition is off.2. Remove the lower grille or access panel under the bumper to reach the fog light area.3. Disconnect the fog light electrical connector if you need to remove the entire assembly.4. Use a trim tool to carefully pry the old bezel away from the bumper clips. Work slowly to avoid breaking the bumper tabs.5. Once the bezel is free, unclip any retaining screws if present.6. Install the new bezel by pressing it firmly into place until all clips engage. Reconnect wiring if necessary.7. Test the fog light operation before reassembling the under-bumper panel.**Durability and Materials**OEM bezels are made from polypropylene/TPO (thermoplastic olefin), which offers good impact resistance and UV stability. Aftermarket parts may use ABS plastic—less durable but cheaper. Always ensure the part meets SAE standards for fog light housings if you plan to retain factory lighting.**Maintenance Tips**- Apply a plastic UV protectant to extend life.- Inspect clips during replacement—if broken, replace them to avoid rattles.- Consider upgrading to LED fog lights while you have the bezel removed.This guide is based on 2025-2026 automotive repair practices and Subaru factory service information.