News

A Straightforward Fix for a Scratched CX-5 Console

The center console is the hardest-working panel in your Mazda CX-5. Keys scrape it, cups slide across it, fingers land on it every trip. After a few years the factory surface looks tired, and there is no cheap factory fix for it.

The Interior Center Console Carbon Fiber Molding Sticker Decals solve that with a stick-on carbon fiber layer: cover the wear, protect the panel underneath, and change the look of the cabin. The set is shaped specifically for the 2013, 2014, 2015, 2016 and 2017 CX-5, so the pieces follow the console moldings with no trimming on your part.

Installation is adhesive-only and takes most owners 15 to 30 minutes. No drilling, no cutting, no professional installer. Clean the panel, peel the backing, press the decal in place — done.

What You Get in the Package

The package holds a complete set of center console decals — every piece needed to cover the console area of the target years. The adhesive is already applied, so there is no separate glue or tape to buy.

The material is authentic carbon fiber rather than a printed imitation. That choice shows up in durability: carbon fiber resists heat and corrosion better than the plastics used in most cabins, it carries UV protection against fading, and it adds essentially no weight to the car.

Because the decals sit on top of the original surface, they work as a sacrificial layer. Scratches land on the decal, not on the panel you would have to replace.

Key Features, One by One

Precision fit for 2013-2017 CX-5 models

These are not universal sheets you trim with scissors. Each piece is engineered for the CX-5 center console, so the edges meet the moldings and the set sits flush. You never modify the car to make it work.

Protection against the three main killers

Scratches, UV damage and daily wear are what age an interior. The decals are waterproof and rated against high temperatures as well, so a spilled drink or a car parked in the sun is handled.

A visible style upgrade

The authentic carbon fiber pattern reads as sporty and high-end. The console is the most-touched and most-seen surface once you are seated, so upgrading it changes the feel of the whole interior.

Low-effort maintenance

Cleaning is a wipe with wet paper towels or a gentle automotive cleaner. The smooth finish resists dust and fingerprints, so the surface stays presentable between cleanings.

Technical Specifications

Every value above matches the fitment and material data published for this decal set. If a single detail decides your purchase, double-check the CX-5 carbon fiber decal product page before you order.

Installation: Four Steps, No Tools

The whole tool list is isopropyl alcohol, a soft cloth and a few minutes of patience.

Step 1 — Prepare the surface

Wipe the center console area thoroughly with isopropyl alcohol to strip off dirt, grease and residue. The adhesive bonds to the panel, so anything left on the surface weakens the hold. Let everything dry completely before you continue.

Step 2 — Test fit every piece

Position the decals on the console without removing the backing. Check the alignment against the edges and moldings from the driver's seat, not just standing over the console. Adjust until each piece sits exactly where it should.

Step 3 — Apply from one edge

Peel the backing and set the decal down starting from one edge, smoothing it out gradually as you go. Working edge to edge pushes air out ahead of the film instead of trapping bubbles underneath.

Step 4 — Press it home

Firmly press the decal into place with a soft cloth and work all the edges down. Give curved areas extra pressure — those are the first spots to lift if the adhesive has not fully seated.

Day-to-Day Care

Once installed, the decals ask for almost nothing. Wet paper towels handle everyday marks and gentle automotive cleaners cover the rest. Skip abrasive scrubbing — the smooth carbon fiber surface already resists dust and fingerprints, so heavy cleaning should be rare.

The waterproof and anti-high temperature properties mean climate is not a concern. Sun, heat and the occasional spilled drink will not force you to redo the job.

Why Decals Instead of Replacing the Console?

• Exact fitment: designed specifically for the Mazda CX-5 2013-2017 center console.
• Authentic material: real carbon fiber, not a flat printed pattern.
• No professional help: adhesive install with no special tools or skills.
• Lasting protection: guards against scratches and UV damage; waterproof and heat resistant.
• Resale value: the original surface stays untouched underneath the decals.
• Lower cost: an affordable alternative to full console replacement.

Carbon fiber also brings inherent advantages as a material. It handles heat and corrosion well, weighs almost nothing, outlasts traditional interior plastics, and keeps its look because UV protection is built in. That is why it shows up in performance interiors — and why it works as a protective skin on your console.

Thousands of Mazda CX-5 owners worldwide already run this decal set. 15 to 30 minutes of work, a protected console, and an interior that looks a tier above stock.

Want the full walkthrough with more background on the material and the fitment? Read our dedicated guide: Enhance Your Mazda CX-5 Interior with Carbon Fiber Center Console Decals.

While You Are At It: Related Mazda Parts

A 2013-2017 CX-5 is old enough that other parts start asking for attention. If a replacement clock spring is on your to-do list, we stock a clock spring covering the Mazda 3 and 6 (2014-2018), CX-3, CX-5 (2013-2019) and CX-9 (2016-2018) — direct coverage for your CX-5's model years and beyond.

For engine-side work, we also carry a set of four fuel injectors for the Mazda Speed 3 (2007-2013), Speed 6 (2006-2007) and CX-7 (2007-2012). Different Mazdas, same approach: parts matched to specific models and years.

Planning more cabin work? Browse the full interior auto parts collection to see the complete range of interior parts we carry before you order.

Questions Before You Buy?

Not sure the decals match your exact console trim? Send your model year and question through the request-for-quote page and our team will get back to you.

You can also email support@koeep.com or reach us on WhatsApp with fitment, stock or shipping questions.

Upgrade the Console This Weekend

Frequently Asked Questions