News

What This Product Actually Is

The Interior Center Console 5D Carbon Fiber Molding Sticker for Ford Fusion 2017 is a pre-cut overlay for the center console of a 2017 Fusion. It covers the factory plastic with a 5D carbon fiber finish and bonds down with automotive-grade 3M adhesive. You do not remove the console, cut anything, or buy a replacement trim panel.

Because each piece is cut to the console's contours, alignment is simple: peel the backing, position, press. Most owners finish the whole installation in 15 to 30 minutes with no professional help.

Why Upgrade the Console First?

The center console is one of the most frequently touched and most visible areas of your interior. Belt buckles, rings, and keys scratch it daily, and worn plastic drags down the look of everything around it. A cover sticker fixes that in one session:

• Protection: the sticker shields the original console from scratches and daily wear.
• Personalization: the carbon fiber finish changes the feel of the whole cabin.
• Resale value: a premium-looking interior makes the car more appealing to buyers.
• Cost control: the luxury look without paying for expensive replacement parts.

What "5D" Carbon Fiber Means

Standard carbon fiber vinyl looks flat under interior lighting. The 5D version is made with an advanced manufacturing process that adds depth and realism to the weave, so the surface reads much closer to authentic carbon fiber than a traditional wrap. That depth is why this sticker looks like a factory option instead of a decal.

The material also carries a UV protection coating, so the finish resists fading and discoloration from sunlight through the windshield. On a console panel that sits in direct sun for hours, that matters more than almost any other line on the spec sheet.

If you want to compare styles before you commit, Koeep also lists the Interior Center Console Carbon Fiber Molding Sticker Decals for Ford Fusion 2017 — a decals variant cut for the same model year. Same console, different finish style.

Key Specifications at a Glance

Every number below comes from the product's own specifications.

Feature Breakdown

3M adhesive technology

The backing uses 3M adhesive designed for automotive interiors. It bonds firmly so the edges do not lift, and when removed properly it comes off without residue and without damaging the original console surface. That makes it a safe choice if you lease the car or plan to sell it.

UV, scratch, and heat resistance

Three protections do the long-term work. The UV coating stops fading and discoloration. The scratch-resistant surface keeps its look through daily contact. The heat-resistant material handles the temperature swings a closed car goes through, so the finish holds up in summer heat and winter cold alike.

Pre-cut patterns

You are not trimming vinyl freehand. Each piece arrives cut to match a specific section of the Fusion console, which is what keeps the job in the 15 to 30 minute range and makes it beginner-friendly.

Shop the 5D Console Sticker

How to Install It: Five Steps

No special tools needed — a squeegee for the air bubbles and, optionally, a heat gun or hair dryer for curved edges. Work slow and the result looks professional.

1. Surface preparation: clean the center console thoroughly with isopropyl alcohol to remove every trace of oil and residue.
2. Dry fit: position the sticker with the backing still on to check alignment before any adhesive touches plastic.
3. Peel and apply: peel the backing slowly while pressing the sticker onto the surface as you go.
4. Bubble removal: work a squeegee from the center outward to push trapped air out from under the film.
5. Final press: apply firm pressure for 30 seconds so the adhesive bonds properly.

Pro tip: curved edges are the only tricky part. Warm the material with a heat gun or hair dryer on a low setting and it softens enough to conform to the console's curves without creasing.

Fitment Notes: 2017 and Newer Fusions

This 5D sticker is cut specifically for the 2017 Fusion and fits every trim level — SE, SEL, and Titanium. No trimming or modification is needed to line it up with the console moldings.

Later model years

If your Fusion is a 2017 or newer model and you prefer the decals style, Koeep carries the Interior Center Console Carbon Fiber Molding Sticker Decals for Ford Fusion 17+. Same console coverage, different finish — handy if you are matching other carbon fiber pieces already in the cabin.

Building a bigger interior order

For dash trim, covers, and other cabin parts, browse the full Interior Auto Parts collection at Koeep and put everything in one order. If you want a longer walkthrough before the first peel, the companion guide Transform Your Ford Fusion Interior with 5D Carbon Fiber Center Console Sticker covers the same install with extra detail on prep and alignment.

Why Owners Keep Buying This Kit

The track record is consistent: a 4.8/5 average customer rating and a 95% installation success rate. In plain terms, almost everyone who buys it finishes the install without help, and almost everyone rates it highly afterward.

• 4.8/5 average customer rating
• 95% installation success rate
• 30-day satisfaction guarantee
• Professional automotive-grade materials

Need a Fitment Answer First?

Three fast routes to a human before you order:

• RFQ form: send your question through the request for quote page and get a written answer.
• Email: write directly to support@koeep.com.
• WhatsApp: message the team at +86 181 3883 8291 on WhatsApp for a quick reply.

Frequently Asked Questions