News

ECCPP 2x Front Hood Lift Support Gas Strut (Part 6462): The Straight Guide for 2009-2015 Chevrolet Traverse Owners

Two gas struts hold your Traverse's hood open every time you prop it. When they wear out, the hood sags, drifts down, or drops without warning. The fix is quick — if you order the right part.

The ECCPP 2x Front Hood Lift Support Gas Strut set is built for 2009-2015 Chevrolet Traverse models. It ships as a pair, carries part number 6462, and bolts onto the factory mounting points with no modifications.

What You Get in the Box

• Two complete gas struts — one per side, a full replacement set
• Part number 6462, matched to 2009-2015 Traverse fitment
• High-strength steel bodies with a protective, corrosion-resistant coating
• Gas charge tuned to the Traverse hood weight for the right lift force

No brackets, no adapters, no fabrication. The struts use the factory ball studs, so the whole job is remove-and-clip. That is what a direct OEM replacement means.

Key Features, Plainly Listed

• Precision fit: engineered to exact OEM specifications for 2009-2015 Traverse models
• Complete pair: two struts per order, so both sides get replaced together
• Steel build: corrosion-resistant finish made for under-hood conditions
• Correct lift force: pressure engineered for smooth opening and closing
• Simple install: direct bolt-on design, no cutting or drilling
• Long service life: superior sealing technology holds the gas charge

Full Specifications for the 6462 Set

Every line below comes from the product specification for this set:

Each strut is pressure tested, cycle tested, and visually inspected before packaging. The 12-month warranty and the 30-day return window stand behind that process.

Four Signs Your Hood Struts Are Done

Gas struts fade slowly, then quit suddenly. Watch for these symptoms on your Traverse:

• The hood will not stay open on its own
• The hood closes unexpectedly while you are working
• You can see fluid leaking from a strut body
• The hood has become hard to open or hard to close

Any of these on a 2009-2015 Traverse means it is time for new supports. A strut that has lost its charge can let the hood come down while your hands or head are under it.

Replace in pairs — always. Matching struts keep the support balanced and prevent uneven stress on the hood components. The ECCPP set includes both struts you need, so there is no reason to reuse the old one.

Installation: Five Steps, Basic Tools

Most owners with a flathead screwdriver or a trim tool can do this in a driveway. The tool releases the retaining clips; the rest is alignment and testing. If you would rather not work on the vehicle yourself, any shop can handle a direct bolt-on part.

1. Safety first: use proper support — the hood prop rod — whenever you work under the hood
2. Clean the mounting points: remove debris and corrosion from both mounting areas
3. Do both sides: install both new struts at the same time for balanced performance
4. Check alignment: make sure the ball studs line up properly before you load the strut
5. Test the operation: open and close the hood several times to verify smooth travel

There is no wiring, no drilling, and no trimming anywhere in this job. The DIY-friendly design is a real difference from dealer parts, which often assume professional installation.

How Long Will They Last?

With proper installation and normal use, ECCPP hood lift supports are designed to last 5-7 years, or roughly 50,000-70,000 open and close cycles. That compares favorably with OEM components while costing significantly less.

Here is where the set stands against factory struts:

Hood Struts vs Suspension Struts — Do Not Mix Them Up

This kit lifts your hood. It has nothing to do with the suspension struts that shape how the Traverse rides and handles bumps. Buyers confuse the two constantly, so check the category before you click buy.

If your Traverse, Buick Enclave, GMC Acadia, or Saturn Outlook also needs front suspension work, the matching part is the front strut and shock built for those four models. Different job, different part, same platform.

Driving a 2013-2016 Traverse?

There is a dedicated hood strut set for the extended range: the 2x Front Hood Gas Lift Supports Struts Shocks For 2013-2016 Chevrolet Traverse. Match the year range to your vehicle before you order — the two sets are not interchangeable.

The Full Catalog and More Reading

For the wider parts range across auto and motorcycle applications, start at the Steering and Suspension Parts collection and browse from there.

Want the suspension side of this vehicle family covered in depth? The 2026 Front Strut Mounts guide for the Buick Enclave, Chevrolet Traverse, and GMC Acadia walks through OEM-grade strut mount replacement on the same platform — a completely separate job from the hood struts covered here.

Buying From Koeep: Warranty, Returns, Support

The 6462 set carries a 12-month warranty and a 30-day return policy. Ordering through the official Koeep product page gets you direct manufacturer pricing, quality assurance and testing, comprehensive customer support, and an easy returns and warranty process.

• Free shipping available on qualified orders
• 30-day satisfaction guarantee
• ISO 9001 certified manufacturing
• Pressure tested, cycle tested, and inspected before packaging

Not Sure the 6462 Fits Your Build?

Send your vehicle details through the request for quote page and get a fitment answer before you order. You can also email support@koeep.com or message the team directly on WhatsApp. A two-minute check beats a return shipment.

Frequently Asked Questions