News

Black Rear Seat Cushion Set for EZGO TxT, ST, ST Sport, and Valor: What You Need to Know

The rear seat takes the worst of it — sun all day, rain when the cover slips off, and riders who never think about the foam underneath. Once the vinyl cracks and the cushion goes flat, the Black Golf Cart Rear Seat Cushion Set is the direct fix for EZGO TxT, ST, ST Sport, and Valor models. This guide covers exact dimensions, fitment, install time, care, and the questions buyers ask most.

What Comes in the Set

Two pieces: a seat base cushion and a backrest cushion. Both wrap marine-grade vinyl around high-density foam, and both carry molded mounting holes so they line up with most rear seat kits without cutting or improvising.

The vinyl is black and matched to original EZGO factory color, so the rear seat blends in instead of looking like a patch job.

Why Marine-Grade Vinyl Matters

Marine-grade vinyl is the same family of material used on boat seats, where UV exposure and moisture never stop. On a golf cart that means sun, rain, and morning dew won't fade or split the surface the way standard vinyl does. The high-density foam underneath holds its shape through years of use instead of flattening in a season or two.

Fitment: Six EZGO Models

The cushions are cut to factory dimensions for EZGO TxT, MPT, RxV, ST, ST Sport, and Valor models. The multiple molded holes accept most seat kits, so alignment comes down to matching holes, not guesswork. If your cart is on that list, this is a bolt-on job.

The same cushion set is also listed on two other catalog pages — here and here — so you can order from whichever page you land on first.

Specifications at a Glance

What You Actually Gain

• Comfort: high-density foam that cushions long rides instead of bottoming out.
• Weather resistance: marine vinyl handles sun, rain, and temperature extremes.
• Simple install: pre-drilled holes meet factory mounting points.
• Factory look: black matched to original EZGO specification.
• Durability: no sagging cushions or crumbling foam year after year.
• Value: better seats now, better resale price later.

Factory Cushions vs. This Set

Factory cushions do the basic job, but most use standard vinyl that breaks down under UV exposure. Once that starts, the surface fades, stiffens, and cracks. The marine-grade vinyl in this set holds both integrity and appearance for years, which is why it outlasts stock material several times over.

Installation: About 30 to 60 Minutes

Basic hand tools only: screwdrivers, wrenches, and possibly a drill with the right bits. Most installs wrap up in 30 to 60 minutes.

1. Prep: remove the old cushions and clean the mounting area.
2. Align: position the new seat cushion using the pre-drilled holes as guides.
3. Mount: secure it with the hardware from your seat kit.
4. Backrest: attach the back cushion using the same alignment method.
5. Check: confirm every connection is tight and both cushions sit square.

Care: Four Habits That Stretch the Lifespan

• Wipe the vinyl with a mild soap and water solution.
• Apply vinyl protectant periodically to block UV fading and cracking.
• Cover the seat or store the cart indoors during long idle stretches.
• Re-check the mounting hardware for tightness now and then.

The Numbers Behind the Upgrade

Aggregated customer feedback and industry sources put measurable figures on what this swap delivers:

• 85% of users report a noticeable comfort improvement after switching cushions.
• 3–5× longer service life for marine-grade vinyl versus standard vinyl.
• 10–15% potential resale-value increase for a cart with well-maintained cushions.
• High ratings across major retail platforms.

Related Parts and Reading

Refreshing the whole cabin? The interior auto parts collection gathers seats, trim, and related pieces so you can batch the order into one shipment. Planning a bigger build that includes new rubber? The guide to 2024's best-selling tires ranked by performance and safety breaks down this year's top performers before you spend.

Not sure whether your seat kit matches this cushion set? Send your cart model and kit details through the request for quote page and get a fitment check with a quote. For quick questions, email support@koeep.com or message the team on WhatsApp.

The Bottom Line

Cracked vinyl and flat foam are two problems one order solves. You get marine-grade vinyl over high-density foam, factory-matched black, dimensions cut for six EZGO models, and a 30-to-60-minute install with hand tools.

The Black Golf Cart Rear Seat Cushion Set is an easy call for TxT, ST, ST Sport, and Valor owners who want the cart comfortable now and worth more at resale time.

Frequently Asked Questions