News

What This Compressor Does

Your A/C compressor is the pump that keeps refrigerant moving through the air conditioning loop. When it wears out, the vents blow warm, the clutch may stop engaging, and the whole system goes quiet. The A/C Compressor w/ PXC14 Compressor for Chevrolet Cruze 2016-2018 (OEM 39067789) is a brand-new replacement built for that exact job on Cruze models with the 1.4L turbocharged engine.

This unit ships as a complete assembly — compressor and clutch together. You install one bolt-in component instead of moving the clutch from your old compressor. It is manufactured to the original equipment specification for part number 39067789, so mounting points, refrigerant ports, and the electrical connector all sit where the factory put them.

Where to Find It

Photos, current pricing, and stock levels live on the A/C Compressor w/ PXC14 product page. The identical unit is also listed under its OEM number at the 39067789 listing — handy if you want to compare against the number stamped on your old compressor before you order.

Specifications at a Glance

That cross-reference row matters more than it looks. Parts counters and other catalogs may list this compressor under any of those four numbers — if a quote or an old receipt shows one of them, you are looking at the same unit.

Will It Fit Your Cruze?

Check three things before you order: model year, engine, and the number on your old unit. This compressor covers 2016, 2017, and 2018 Cruze models with the 1.4L turbocharged engine. If your Cruze runs a different engine or was built before 2016, this is not your part.

The fastest check is the stamp on your current compressor. If it reads 39067789, or one of the cross-references CO11489C, 67570, 13427936, or 39139989, this unit is a direct match and bolts in with no modifications.

Driving an earlier Cruze? This part will not fit a 2012-2015 sedan. That generation uses a different compressor: the AC Compressor w/ Clutch for the 2012-2015 Chevrolet Cruze Sedan 4-Door (3913319, 1.4L). Ordering for the correct generation the first time saves you a return shipment and days without a car.

Key Features

• PXC14 variable displacement design. The compressor adjusts its output to match cooling demand, holding cabin temperature without wasting engine power.
• OEM direct replacement. Built to the 39067789 specification, so it integrates with your Cruze's existing A/C system without adapters.
• Complete assembly. Compressor and clutch ship together — no need to strip parts off your old unit.
• Premium construction. High-quality materials and precision engineering for long service life.
• Factory-level performance. Designed to deliver the same cooling capacity and efficiency as the original compressor.

See Full Product Details

Why Choose This Unit Over a Generic Compressor?

1. No fitment surprises. Engineered specifically for 2016-2018 Cruze models, so no cutting, bracket bending, or wiring rework during installation.
2. Efficient cooling. Variable displacement technology provides efficient cooling while minimizing power draw from the engine.
3. Durability. High-quality components built to handle daily driving and repeated heat cycles.
4. Reliability. Manufactured to strict quality standards for consistent performance.
5. Warranty protection. Backed by a comprehensive 1-year warranty for peace of mind.

Symptoms of a Failing Compressor

Compressors rarely fail without warning. Catch the signs early and you also protect the rest of the A/C system from the debris a dying unit spreads through the refrigerant loop.

• Cooling performance has dropped and the vents are not as cold as before
• Unusual noises — growling, grinding, rattling — from the compressor
• Visible leaks around the compressor body or shaft seal
• The clutch does not engage when you switch the A/C on
• The compressor has seized

One symptom means it is time to test the system. Two or more usually point straight at the compressor. Replacing it before a full seizure limits the contamination that reaches the lines, the condenser, and the rest of the loop.

Installation Notes

Be realistic about this job. A/C systems hold pressure, and the work needs clean handling plus equipment most driveways do not have. Here is what the replacement involves:

• Professional installation recommended. A/C work requires specialized tools and knowledge, from manifold gauges to refrigerant handling.
• Flush the system. Always flush the A/C system when replacing the compressor to remove contaminants.
• Refrigerant type. The 2016-2018 Cruze uses R-134a.
• Oil type. Use PAG oil compatible with R-134a systems.
• Evacuate and charge properly. Correct evacuation and charging are essential for optimal performance.

A shop can swap the compressor, flush the system, and recharge it in one visit. The main risk of a DIY attempt without proper equipment is air or moisture left inside the loop — both cut cooling performance and shorten the life of the brand-new compressor you just installed.

Parts to Replace at the Same Time

A compressor rarely fails alone. When it sheds debris, that material circulates through the whole system, and a new compressor dropped into a dirty loop will not last. Alongside the compressor, replace the receiver/drier or accumulator and the expansion valve or orifice tube. If other components show signs of wear or contamination, replace them while the system is already open.

Every part for the job — compressors, driers, valves, and more — sits in one place in our AC & Heating Parts catalog. Building the full parts list from one collection keeps shipping consolidated and gets your Cruze back to cooling sooner.

Making the New Compressor Last

Proper A/C system maintenance can extend compressor life by 30-50%. That is a solid return for basic habits: schedule regular system inspections to catch problems before they turn into premature compressor failure, keep the R-134a charge correct, and always run PAG oil rated for R-134a systems. The wrong refrigerant or oil is one of the fastest ways to shorten system life.

Questions? Talk to Us

Need pricing on a multi-unit or shop order, or hunting a part that is not on the site? Submit an RFQ at https://koeep.com/pages/request-for-quote and the team will come back with pricing and availability.

You can also reach us directly: email support@koeep.com or message us on WhatsApp at +86 181 3883 8291 for quick answers on fitment and shipping. Prefer to read on the blog? This guide is also published at koeep.com/blogs/news.

Frequently Asked Questions