News

Essential Specs & 2026 Compliance

This ignition coil + spark plug kit for Chrysler, Dodge, Jeep & Ram is engineered for the 3.6L Pentastar V6 across 2011–2026 model years. It meets 2026 ignition-service expectations for coil-on-plug systems, including SAE J973_202603 validation and OBD-II CAN/DoCAN diagnostic compatibility. The kit uses iridium-center plugs pre-gapped to 0.040 in / 1.0 mm and epoxy-potted COP coils designed for start-stop and downsized-turbo thermal cycles.

• Fitment: Chrysler 200/300, Dodge Charger/Challenger/Durango, Jeep Wrangler/Grand Cherokee, Ram 1500 with 3.6L Pentastar.
• DTC coverage: Resolves misfire and ignition-circuit codes in the P0300–P0312 and P0350–P0362 families.
• Service life: Iridium plugs 60k–100k mi; coils 100k mi per OEM cycle.

Technical Notes

BASF-class polymer shells, copper windings, and dielectric encapsulation resist moisture and heat. Replace all six coils and plugs as a matched set to maintain bank-to-bank dwell and avoid ghost P0300 misfires. Verify engine code (ERB, EGT, or G) before installing.

Installation Checklist

• Torque coils to 89 lb-in (10 N·m) or per OEM spec.
• Use anti-seize only on plug threads if required by the service manual.
• Confirm 2026 PCM software is current before misfire diagnosis.
• Use OBD-II Mode $06 data to verify cylinder power balance.