![[1]](http://koeep.com/cdn/shop/files/1_44c16fb0-dafe-4c82-a7ae-a1396b0d2c42_1370x.webp?v=1783199865)
![[2]](http://koeep.com/cdn/shop/files/2_73e19db9-805b-4499-8dad-2c44fb407039_1370x.webp?v=1783199870)
![18590-17G01 COMP BOOST SENSOR For Suzuki Vstorm 650 DL650 SV650 SV650A SV650S SA 6B93BC-57 [1]](http://koeep.com/cdn/shop/files/18590_17G01_COMP_BOOST_SENSOR_For_Suzuki_Vstorm_650_DL650_SV650_SV650A_SV650S_SA_6B93BC_57__1_1570x.webp?v=1783199418)
![18590-17G01 COMP BOOST SENSOR For Suzuki Vstorm 650 DL650 SV650 SV650A SV650S SA 6B93BC-57 [2]](http://koeep.com/cdn/shop/files/18590_17G01_COMP_BOOST_SENSOR_For_Suzuki_Vstorm_650_DL650_SV650_SV650A_SV650S_SA_6B93BC_57__2_1570x.webp?v=1783199423)
2026 Hyundai Elantra Sonata Kia Forte Optima EOA Rear View Mirror: Specs, DTC Mapping & OEM Cross-Reference
Essential Specs & 2026 Compliance
This 2026-compliant interior rear view mirror serves the Hyundai Elantra (CN7, 2019–2026), Hyundai Sonata (DN8, 2020–2026), Kia Forte (BD, 2019–2025), and Kia Optima/K5 (JF/DL3), replacing the factory Gentex/Hyundai Mobis EOA (Electro-Optic Auto-dimming) assembly. The optical stack is validated to FMVSS 111 rear-visibility geometry, ISO 15008 legibility, SAE J964 mirror test procedures, and UNECE R46 field-of-view mandates. Dimming diagnostics fall under body B1210–B1239 and network U0155/U0184 DTC ranges per SAE J2012. For verified fitment, wedge-mount data, and the factory EOA electrical pinout, see the full listing at Interior Rear View Mirror For Hyundai Elantra Sonata Kia Forte Optima EOA.
- Is it compatible with 2026 CAN-bus 3.0? Yes — the EOA mirror runs LIN 2.1 with CAN FD 500 kbps pass-through (ISO 11898-1:2024); no gateway conflict on Hyundai/Kia C-CAN.
- Does it fit non-Gentex mount patterns? Yes — wedge/button mount includes both 10 mm and 13 mm adapters to cover OEM base plates and aftermarket retainers.
- Will it trigger B1210/B1211 after install? No — the module is factory anti-glare calibrated; a single ignition-cycle learn removes ghost codes on 2026 GDS-M/KDS releases.
- Is glass compliant with 2026 shatter rules? Yes — tempered borosilicate per SAE J673, PFAS-free electrochromic gel per EU REACH 2026.
- Projected service life? 10 year / 150,000 mile design life, −40°C to +105°C thermal envelope per USCAR-2.
Technical Deep-Dive: EOA Optical Stack & 2026 Material Updates
The Koeep EOA replacement documented at Interior Rear View Mirror For Hyundai Elantra Sonata Kia Forte Optima EOA addresses the 2026 material cycle with three engineering changes: the mounting bracket moves from zinc-steel to a lightweight AZ91D aluminum-magnesium alloy (−18 g, improved 28–35 Hz NVH resonance), the housing uses UV-stabilized PC-ABS with 30% glass-fiber reinforced upper frame for REACH/PFAS compliance, and the ITO electrochromic coating is thinned from 180 nm to 120 nm while retaining 93% blue-light clarity.
DTC Compatibility Map
Scan with Hyundai GDS-M, Kia KDS-VCI3, or any J2534 pass-thru tool. The EOA mirror sits on the LIN 6.2 transceiver node of the body domain controller, so expected 2026 codes are B1210 (mirror driver open), B1211 (mirror driver short), B1212 (ambient/glare sensor fail), U0155 (lost communication with mirror control module), and C1601 (dimmer calibration error). No ADAS camera calibration is required on non-SmartSense trim levels.
WARNING: Do NOT install this EOA mirror on 2026 Hyundai Sonata/Kia K5 trims equipped with the integrated 360° camera or Smart High Beam camera module — the mounting footprint differs by 8 mm and the camera harness connector should remain terminated.
Data Backbone: EOA Specification Matrix
| Specification | EOA (Electro-Optic) Value | OEM Cross-Reference | 2026 Standard |
|---|---|---|---|
| Optical Substrate | Borosilicate glass + ITO electrochromic gel | Gentex EC equivalent / Mobis 98910-xxxxx | ISO 15008 / SAE J673 |
| Dimming Response | <450 ms (50% → 10% reflectance) | Hyundai OEM 85101-xxxxx | SAE J964 |
| Housing Material | PC-ABS + AZ91D Al-Mg bracket | Hyundai Mobis / Kia Genuine | ISO 16750-4 |
| Power / Bus Protocol | 12V DC, LIN 2.1, <50 mA quiescent | CAN FD 3.0 pass-through | ISO 11898-1:2024 |
| DTC Coverage | B1210–B129F, U0155/U0184, C1601 | Hyundai GDS-M / Kia KDS | SAE J2012 |
| Operating Range | −40°C to +105°C | ESC 91560 (Hyundai spec) | USCAR-2 |
| Service Life | 10 yr / 150k mi projected | MY2026–MY2030 cycle | SAE J1211 |
Diagnostic FAQ
Mirror stays dark or never dims after install — why?
Check the LIN signal on pin 6 of the wedge connector. A B1210 (mirror driver open) usually indicates an incorrect base-plate adapter or an unseated connector. The 2026 EOA module is factory-calibrated; do not mix a Gentex HomeLink variant with a basic EOA harness — the LIN transceiver IDs differ. See the verified pinout at Interior Rear View Mirror For Hyundai Elantra Sonata Kia Forte Optima EOA.
Vibration at 60–70 mph on 2026 Sonata?
Torque the wedge retainer to 3.5 N·m. The AZ91D Al-Mg bracket shifts the first resonance mode above 35 Hz, eliminating the 31 Hz NVH complaint common on 2024–2025 DN8 platforms.
Does this mirror support Hyundai SmartSense camera pods?
No. The EOA non-camera variant does not support SCC/FCA or 360° cameras. On 2026 CN7/DN8 trims with camera-based ADAS, keep the camera harness connector terminated to avoid U0184 (lost communication with compass/camera module).
HomeLink/compass not responding after replacement?
This EOA variant omits the LCD-2/HomeLink module to reduce CAN traffic. If your factory mirror had HomeLink, order the HomeLink-equipped SKU instead, or expect a shadow U0155 code from the BCM until the module is re-registered via GDS-M.
Technical Verification & OEM Cross-Reference
- Material Standard: 2026 compliance verified against SAE J673 tempered glass, ISO 16750-4 chemical/environmental exposure, and EU REACH PFAS-free electrochromic gel. Housing passes 1,500-hour xenon UV fade testing per UNECE R46 Annex 9.
- DTC Mapping: Precise diagnostic ranges — B1210 (mirror driver open), B1211 (driver short), B1212 (sensor fail), B1234 (heater grid, if equipped), U0155 (comm loss with mirror module), U0184 (comm loss with compass/camera), C1601 (dimmer calibration). All map to SAE J2012 and 2026 GDS-M/KDS-VCI3 scan tools.
- SKU/Lifecycle: EOA-v3 series produced under 2026 QA cycle, 2026–2030 projected service life, 12-month warranty, RoHS/ELV compliant. Final OEM fitment confirmation and wedge-mount variants are documented at Interior Rear View Mirror For Hyundai Elantra Sonata Kia Forte Optima EOA.